4 Inch hinge belt conveyor
Hinge belt conveyors are best suited for low coolant content and bushy or broken chips. Pitch sizes of 2.5” (63mm), 4” (100mm), 6” (150mm), and 9” (225mm) are typically used for chip handling, depending on expected load. Special designs incorporating dimples, perforations, and reinforcements are available to suit more demanding applications.
FIELDS OF APPLICATION
- Everywhere where large volumes of (metallic) chips occur
- Tool machines e.g. turning machines, stripper machines, boring machines, deep drilling machines
- As collecting conveyor for several tool machines
- Waste removal for rough turning machines
- Suitable for heavy chips
- Transport distances up to 70 m
BENEFITS
- Low operating costs
- Proven roller block design to ensure a long lifetime for the chain
- Resistant overload protection for the drive unit to increase the lifetime of the motor
- Can also be operated as a collecting conveyor for covering long distances
| Type | 4" | 6" |
|---|---|---|
| Chain pitch | 101,6 mm | 152,4 mm |
| Belt thickness | 4 mm | 5 mm |
| Belt width (W) Min. | 152 mm | 305 mm |
| Belt width (W) Max. | 1219 mm | 1524 mm |
| Cleat height | 63 mm | 100 mm |
| Belt speed M/Min. | 1--12 | 1--12 |
| Appication for machines with max spindle power (recommendation) | 90 KW | 300 KW |
| Max. center line length (recommendation) | 60 M | 100 M |
- Brochures
- Schema
- Contact
